Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.67998mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #fd3e3e PLA Sunlu Meta red  Transmission Distance: 7
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #e2dedb PLA PolyLite White  Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to red
    At layer #10 (0.88mm) swap to Yellow
    At layer #14 (1.2mm) swap to White for the rest.

.

Wenn euch meine Arbeit gefällt dann gebt mir gern einen LIKE und einen FOLLOW oder Boost mein Huefroge Motiv. Darüber würde ich mich sehr freuen