Project: Concorde.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 175x113mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mm

Filaments Used:
    PLA Black  Transmission Distance: 1.5
    PLA Red  Transmission Distance: 4.5
    PLA Orange  Transmission Distance: 5.5
    PLA Yellow  Transmission Distance: 6
    PLA White  Transmission Distance: 2.5
This print uses 5 unique filaments but still looks good without the white - these are just the highlights on the lights and sun glare

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #13 (1.12mm) swap to Orange
    At layer #20 (1.68mm) swap to  Yellow
    At layer #25 (2.08mm) swap to White for the rest.