Minecraft Lamp 

⚠️ Before printing, please do the Ironing test: [https://makerworld.com/en/models/2267663](https://makerworld.com/en/models/2267663)

Why Ironing Calibration Matters: Ironing behavior varies significantly between printers and even between different PLA brands due to differences in extrusion, cooling, and filament formulation. Calibrating ironing settings for each filament on each printer ensures the smoothest possible top surfaces and prevents over- or under-ironing artefacts. Even the same filament can produce different results on identical printer models due to mechanical tolerances, wear, environmental conditions, and calibration differences.

Print diffusers in any transparent colour you want.

Can be used with 2 types of Bambu lights:

• [https://uk.store.bambulab.com/products/led-lamp-kit-001?id=41123227435068](https://uk.store.bambulab.com/products/led-lamp-kit-001?id=41123227435068)
• [https://uk.store.bambulab.com/products/remote-controlled-16-color-rgbw-puck-lights](https://uk.store.bambulab.com/products/remote-controlled-16-color-rgbw-puck-lights)

NOTE: For a white colour light, use an additional internal diffuser for a better colour. I printed diffusers with PLA and PETG and the PLA rectangular shape is much better in the same time PETG loses its original shape and has wawes.

Assembling:

1. Place the light (and diffuser) and stick it with double-sided tape or hot glue

   

2. Glue angle shadows 

   

   

   3. Insert pins only to the bottom side of the side elements

   

   4. Insert pins to the Top side, place it a paper and write sides on the paper

   

   5. Glue the diffuser and centre it by the sides according numbers on the paper. Don't glue sides on this step!

   

   6. Glue the sides one by one.

   

   7. Add the bottom part and apply some weight for a while. You don't need to glue the bottom part, it should hold together well, but if you want you can.