A customizable storage bin to maximize the space on your Ikea Skadis peg board. The bins are stackable and can be placed horizontally and vertically.  Stacking is achieved by using alternative backplates to allow adjacent placement of bins. The alternative backplate has its own print profile. You only need to use it if you want to have bins next to each other.

Optional magnets holds the bins in place while a button is used to eject the bin from the housing. Custom storage drawers can be created using the supplied OpenSCAD file, allowing for the addition of text or SVG images. 

Two different styles have been included. Each resides on their own print profile.

Note: The design works best with the spring and magnets, but they are not required. If you are curious about the design you can first print the bin and then add the spring and magnet at a later stage.

Assembly instructions:

Step 1: Insert magnets into the backplate and storage drawer. Glue is recommended.

Step 2: Insert the spring into the print in place button and connect the spinner and cap. I recommend the use of tweezers as this simplifies the spring insertion greatly.

Step 3: Insert the print in place button into the housing.

Step 4: Slide the backplate into the housing.

Step 5: Insert the locking pins through the backplate and into the housing and button mechanism. Note that once the pins are inserted they are difficult to remove.

Customizbale Bins

Custom bins can be printed downloaded using OpensCAD. However please print in the following orientation with supports enabled if you are using multiple colors. This orientation does use more support material but it also ensures a clean print. If you are using custom SVGs, you will need to tick the image checkbox and increase the scale as your first step.

The original svg files I created for myself has been attached as a documentation zip file to this project. I recommend setting the image scale to 1.5.