专为摄影配件设计的 17mm标准球头（常见于三脚架、相机支架及扩展配件）。

模型采用 分体式结构，将球头对半切开后打印，相比一体成型的设计，能有效避免层间断裂，大幅提升强度与耐用性。

底部预留了标准 1/4英寸摄影螺口 的滚花铜螺母嵌入槽（可通过热熔植入方式安装），兼容绝大多数摄影设备与支架。

使用时，需在两片结构间加入少量 强力胶，即可获得稳固的整体，非常适合作为摄影配件或手机支架玩家，既保证了结构强度，又具备良好的通用性。

* 推荐使用我的打印方案进行打印，能得到更完美的球形效果。

特点：

• 标准 17mm 摄影球头规格，兼容性强
• 分体式打印，强度更高，不易断裂
• 底部可植入 1/4" 螺母，广泛适配摄影设备

This is a 17mm standard ball head designed for photography accessories (commonly used in tripods, camera mounts, and extension arms). 

The model features a split design, where the ball is printed in two halves. Compared with a one-piece print, this greatly improves durability and reduces the risk of layer breakage, making it much stronger for practical use.

The bottom side includes a slot for embedding a 1/4-inch knurled brass nut (installed by heat-melting), which ensures full compatibility with most photography gear and support systems.

For assembly, simply apply a small amount of strong adhesive between the two halves, resulting in a secure and robust joint. This makes it an excellent choice for 3D printing enthusiasts and photographers who need both strength and versatility.

*Recommended printing with my provided method for a more accurate and smoother spherical result.

Features:

• Standard 17 mm photography ball head size, highly compatible
• Split-print design for maximum strength and durability
• Bottom slot for 1/4" nut insert, fits most camera gear