Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.72mm) swap to Red
    At layer #15 (1.28mm) swap to Ice Blue

Border Only Colors from here until the end.
    At layer #21 (1.76mm) swap to Ivory White for the rest.