🏮 Modern Japanese Table Lamp

🔧 Required Hardware

• 🔩 4x M3x15 mm socket head cap screws (hex/Allen drive)
• 📌 12x 3x8 mm pins
• 💡 1x Clip-in lamp socket, e.g.:
      National Artcraft Lighting Cord Set from Walmart
• 🧻 Tissue paper or rice paper (for the shade covering)
• 🔥 1x LED bulb
      (e.g., flame-effect bulb for cozy atmosphere)

🖨️ 3D-Printed Parts

• 🧱 4x Frames
• 🪟 4x Inserts/Screens
• ⚓ 1x Base – or a taller one if preferred
• 🔺 1x Top Part 1
• 🔻 1x Top Part 2

💡 Tip: For a fast print, use a 0.3 mm layer height – just like shown in the original photos!

🛠️ Assembly Instructions

1. 🔩 Prepare the Frames:
   Use the M3 screws to gently tap threads into the marked holes (indicated by a downward arrow 🔽).
   👉 Insert the screw slowly with a power drill and then remove it again.
   🔁 Repeat for all 4 frames.
2. 🪟 Install the Inserts:
   Click one insert into each frame – "Click!"
3. 🧻 Attach the Tissue Paper:
   Cut 4 sheets of tissue paper to match the size of the frames and fix them in place using the pins.
   ✂️ + 📌 = 🎐
4. 📦 Assemble the Frame Box:
   Insert pins into the holes along the mitered edges of the frames and press the frames together into a cube.
5. 💡 Install the Socket:
   Clip the lamp socket into the base. Then place the assembled frame box onto the base and secure it with the M3 screws.
6. 🔌 Insert the Bulb:
   Screw in the E12 LED bulb – depending on hand size, this may be easier before attaching the base.
7. 🔺 Assemble the Top:
   Insert 4 pins into Top Part 1, then snap Top Part 2 onto it – voilà, your lid is ready!
8. 🧢 Attach the Lid:
   Place the assembled top onto the finished lamp body.
9. ✨ Plug in & Enjoy!
   Plug it into a power source and enjoy your handcrafted light piece! 🌟🛋️

🛠️ Accessories Used:

• 🔥 LED flame-effect bulb:
  Amazon-Link
• 🧻 Tissue paper:
  Amazon-Link
• 🔌 Micro-USB adapter:
  Amazon-Link