Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50 x 140mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm

Filaments Used:

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#9d432c PLA BambuLab Basic Brown Transmission Distance: 2

#ff8000 PLA BambuLab Basic Orange Transmission Distance: 7

#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Brown

At layer #13 (1.12mm) swap to Orange

At layer #16 (1.36mm) swap to Sunflower Yellow for the rest.