Please rate if you print, this really helps me, thank you

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 53.33x159.99mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Cyan Transmission Distance: 3.5
    PLA BambuLab Basic Jade White Transmission Distance: 4.7
    PLA BambuLab Basic Yellow Transmission Distance: 5.9

This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #13 (1.12mm) swap to Cyan
    At layer #18 (1.52mm) swap to Jade White
    At layer #20 (1.68mm) swap to Yellow for the rest.