I created this mount so my daughter could hang her collection of mouse ears on her wall. We searched for existing models but most were too ornate and took away from the item being displayed. These were designed to be minimal with a single screw or double-stick tape holding them to the wall. The position of the screw is hidden behind the ears so they are very clean. I've printed these in clear, white, black, and gold to match the ears we were displaying.

Here's the screws I used in Silver: [https://amzn.to/4lOCpPH](https://amzn.to/4lOCpPH)

Here's the screws I used in Black: [https://amzn.to/47mFRh4](https://amzn.to/47mFRh4)

You can also use a 1" drywall screw which are easy to get at any big-box home store.

Printing Tips:

• I printed them in PLA which works great and is plenty strong enough for something so light.
• If you use the STL, use 15% infill and print them with the wall side down. 
• I've printed mine with a 0.4mm nozzle but larger nozzles should be fine since the model is simple
• No supports are needed by design so the are super easy to print.