These stackable boxes came in 3 different heights: 50, 75 and 100mm. 

The width, depth and the width of the label plate can be freely adjusted.  

Changelog:

01.09.2025: Versions without label plate are available.

Feature overview: 

• Stackable 
• Stable design with reinforced upper frame 
• 3 heights: 50, 75 and 100mm 
• The width, depth and the width of the label plate can be freely adjusted. 
• Inconspicuous label plate with free text (editable in Bambu Studio) 
• The boxes snaped into place when stacked 
• With and without label plate

There are 3 standard sizes available as print profiles: 

S: 98 x 98 x 50mm (1,6mm wall thickness) 

M: 160 x 98 x 75mm (1,6mm wall thickness) 

L: 220 x 138 x 100mm (2,0mm wall thickness) 

Do you need different width/heights? No problem, read the following instruction: 

Customize instructions: 

After clicking on the customize button you can choose between the 3 heigths: 50, 75 and 100mm. 

After that you can edit the width, the depth and the label plate width in the specified range. 

Important: The label plate width must be at least 25mm shorter then the width.

Print instructions:

If you create your own box: 

• Seperate box and label plate with rightclick on the part → Split → to objects

• Pull the label plate onto a new printing plate.

• Click on the label plate and select the text bottom: 

You can freely choose the font/size etc.  

Here are my recommend settings: 

If you use one of the 3 standard profiles, then you only have to right click on the text_shape under “objects” and click on text edit:

Print settings: 

Box and plate: standard settings for the box (0,2mm layer heigt, 15% Infill) 

Seam position: back

Only label plate: “Arachne” wall generator for better text quality