Project: marsattacks01.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 166.67x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.88mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #800020 PLA+ Elegoo Burgundy Red  Transmission Distance: 5.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #a1da7d PLA+ eSun Peak Green  Transmission Distance: 5.6
    #f0be02 PLA PolyTerra Savannah Yellow  Transmission Distance: 3.5
    #f5f0ec PLA Panchroma Satin White  Transmission Distance: 3.8
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Burgundy Red
    At layer #12 (1.04mm) swap to Red
    At layer #16 (1.36mm) swap to BambuLab Green
    At layer #19 (1.6mm) swap to Peak Green
    At layer #24 (2mm) swap to Savannah Yellow
    At layer #29 (2.4mm) swap to Satin White for the rest.