Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 132.01x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA+ Sunlu Sky Blue Transmission Distance: 4
    PLA Sunlu Meta Cream White Transmission Distance: 7
    PLA Sunlu Meta White Transmission Distance: 8
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Sky Blue
    At layer #15 (1.28mm) swap to Cream White
    At layer #22 (1.84mm) swap to White for the rest.