Check out my TRT Travel Case (TRTavel) HERE:  [https://makerworld.com/en/models/2168974-trt-travel-case-trtavel](https://makerworld.com/en/models/2168974-trt-travel-case-trtavel) 

----------

UPDATE 06-14-26: Added a “mini” version that will fit on an A1 Mini bed (180mmx180mm).  I shrunk up the syringe and the extra needle compartments.  Still has the blank, TRT and TRT Calendar lids.  Still uses the 25mm M3 bolts

Difference in size between mini and regular are:  Same Height, Mini: 150mm Deep x 170mm Wide  Regular:  160mm Deep x 190mm Wide

----------

UPDATE 05-10-26: Added a new base that has 1 row of 18mm diameter vials and 1 row of 22 diameter vials.  You can download from STL files above.

----------

UPDATE 02-18-26: Week calendar on cover with magnetic button to remind you when your next injection will need to take place.  For some reason, I have a hard time remembering when my next injection is because it doesn't fall on the same days.  This fixes that issue.  I just move the button to the next time I need to take meds and viola!

I included a blank cover and one that says TRT in the profile above.  You will need to use 8 (8mm x 2mm) total magnets (7 for days and 1 for the button).  Mine friction fit, but you can always put a drop of superglue in the holes.

Magnets to purchase: [https://a.co/d/0445knxj](https://a.co/d/0445knxj) 

----------

UPDATE 01-19-26: Added a dual row vial holder to Files section.  This one has a 3 slots for 25mm and 3 slots for 22mm diameter vials.

UPDATE 12-22-25: Added a pill bottle profile for keeping pills in the round slots on the side of the case.  Credit to ModMonster for his customizable bottle design.  Check out his design here: [https://makerworld.com/en/models/1679896-completely-customizable-capsule-container](https://makerworld.com/en/models/1679896-completely-customizable-capsule-container) 

UPDATE 10-23-25:  Updated the base of the case to V2.  I found that some vials were shorter, so I added some cutouts to grab shorter vials.  Since I switch out my needles from an 18 gauge to a 25 gauge to help with getting the TRT out of the vial, I added holes to drop in my different needles at the front of the vial section.

Modeled this for a friend.  (wink wink)  Container snaps firmly into place.  

HARDWARE:

You will need 6 x M3x30 or M3x25 bolts for the hinges and clips.  Bolts thread directly into holes.

OPTIONS:

Can be printed with an AMS for the TRT lettering or I also included a single-color cover.

DESCRIPTION:

This is a simple container with 5 compartments:

1. area for 3 vials
2. area for syringes
3. area for alcohol wipes
4. area for hand sanitizer wipes
5. area for notes, pills, etc