Cats - hueforge — STL Grátis

This is 4 color Hueforge of Cats

I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
   PLA BambuLab Basic Black Transmission Distance: 0.6
   PLA BambuLab Basic Blue Gray Transmission Distance: 4
   PLA BambuLab Basic Jade White Transmission Distance: 4.8
    PLA BambuLab Basic Sunflower Yellow Transmission Distance: 3.2
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #10 (0.88mm) swap to BambuLab Basic Blue Gray
    At layer #15 (1.28mm) swap to BambuLab Basic Jade White
    At layer #20 (1.68mm) swap to BambuLab Basic Sunflower Yellow for the rest.

Descrição

Cats - hueforge