This dice rolling set is designed for both function and style, making it perfect for tabletop gaming sessions. The set includes an elegant square tray (200x200x25 mm), lined with soft felt to keep dice rolls quiet and protect dice from wear. To suit different play styles, it comes with three interchangeable dice cups (76x100 mm), each featuring a unique exterior pattern for a distinct look and feel. Whether you prefer a sleek geometric design (hexagon pattern), a textured classic look (knurled pattern), or a more decorative style (rolling dice), you can choose the cup that fits your game. Practical, durable, and visually striking, this set adds an elegant touch to any gaming table.

In order to help stick/adhere the felt inside the dice cup I have included a felt placing aide print profile.

ASSEMBLY INSTRUCTIONS:

DICE TRAY:

Materials:  self adhesive felt fabric, ruler, scissors, pen/pencil

Once you have 3D printed the dice tray, cut out a square felt piece of fabric measuring 194 x 194 mm.  Then glue/paste this on the bottom of the tray.

Next cut out 4 pieces of felt measuring: 194 x 20 mm, and stick to the sides of the tray.  Alternatively, if you only want one seam, then cut out a piece of felt measuring: 776 x 20 mm.  However, this could be a bit tricky making a neat job.

DICE CUP:

Materials: 3D printed felt placing aide, self adhesive felt material, pen/pencil, ruler, scissors

Use the disc from the felt placing aide to draw a circle on the back of the felt.  Alternatively, if you haven't printed out the felt placing aide, use a compass and draw a 69 mm circle and cut out.

Now stick a piece of folded over masking tape on the bottom of the assembled felt placing aide.

Stick the top of the felt to the masking tape in the middle of the disc.  Peel back the paper from the adhesive.

Now carefully lower the felt placing aide into the middle of the cup, and push down for the felt to stick to the bottom of the cup.  Then gently rock the disc back and forth to loosen the masking tape away from the felt.

Now cut out a piece of felt measuring 215 mm x 93 mm.  Even though the actual inside circumference is 219 mm, I have found that the felt fabric stretches and you end up with an overlapping seam, and therefore not a neat finish.

Stick the rectangular piece of felt with masking tape to the rod of the felt placing aide, and carefully roll the felt up onto the rod.

Remove a 1 cm of the adhesive backing paper and now stick to the inside of the cup. 

Now slowly, remove the backing paper while turning the rod to stick the felt onto the inside of the cup.