If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at [https://patreon.com/29flo](https://patreon.com/29flo) and subscribe to a membership tier that suits you. 

[ Suggested Print Setup for 15cm figurine ] - You can scale it up or down as desired.

Nozzle: 0.4mm
Layer Height: 0.2mm ( You can adjust the layer height based on how much detail you want ) 
Infill: 5%
Wall loops: 2
Supports: Tree (auto)
Printed with: BambuLab's:
- PLA Matte Charcoal

Printed with fuzzy skin effect:
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.2
Fuzzy Skin thickness: 0.2

These photos are real and show an actual 3D-printed figure photographed by me.
 

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.