Project: Matrix.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x180mm in size
You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.5
    #00aa00 PLA Generic Green  Transmission Distance: 5
    #e2dedb PLA Bambu Matte white  Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Green
    At layer #15 (1.28mm) swap to Matte white for the rest.