📝 Description:
A 3D model of Gary the Snail from SpongeBob SquarePants, designed as a keychain charm.
This model features Gary’s recognizable shell and expressive eyes mounted on stalks. A small keyring hole is integrated on his back for easy attachment. The design captures the cartoon’s charm with smooth, cute shapes and accurate colors.

Ideal as a collectible, decoration, or gift for fans of SpongeBob SquarePants. The model is optimized for FDM printing and keychain use, with supports configured for the eye stalks and keyring attachment.

⚙️ Print Settings (Tested on Ender 3 V2):

• Layer Height: 0.2 mm
• Wall Thickness: 1.2–1.6 mm (3–4 perimeters)
• Top/Bottom Thickness: 0.8–1 mm (4–5 layers)
• Infill: 20–30% (Gyroid or Cubic recommended)
• Supports: Everywhere for eye stalks; Touching Build Plate for other areas
• Support Density: 10–15%
• Support Overhang Angle: 60°
• Horizontal Distance: 0.2–0.3 mm
• Vertical Distance (Z Gap): 0.2 mm
• Brim: 5–8 mm recommended for bed adhesion
• Print Speed: 50 mm/s (Outer Walls 25–30 mm/s)
• Travel Speed: 120–150 mm/s
• Material: PLA (200–210 °C, Bed 60 °C) or PETG (240–250 °C, Bed 70–75 °C)
• Cooling Fan: 50–100% after 2–3 layers

💡 Extra Tips:

• Rotate the model so the base is flat on the build plate.
• Use Support Blocker for the keyring hole if you don’t want it filled with supports.
• Eye stalks require supports (Everywhere) to print cleanly.
• Brim helps prevent warping for small prints like keychains.