Description

Hueforge Buffalo/Bison

I used Bambu Basic Black, Brown, Yellow and Jade White

File is set at 200mm x 200mm but can be changed, do not change the height (Z axis). Colors can be changed to suit your needs.

Check out my bio for info on commercial rights. 

The files cannot be sold, shared or transferred in any way ever.

Project: buff blk bro yel wht.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #17 (1.44mm) swap to Brown
    At layer #22 (1.84mm) swap to Yellow
    At layer #24 (2mm) swap to White for the rest.