About the model

A popular reproduction of the well know red strip used in aviation to remind covers to be removed before departure.

You can host as much keys as you want, simply changing the length of the screws!

In the picture you can see 6 keys with spacers keps with 16mm screws.

You need to know for printing

Spacers

Main print profile includes spacer disks. May not be strictly necessary, but using them can be more comfortable to move keys (expecially if someone of them are slightly bend).

Pause added in print profiles!

The model hosts, in its back plate, 2 nuts. Those nuts will be put in with a pause in the print. So, no worries if the printer stops working at layer 20!

Once the printer pauses, put in those 2 M3 nuts in their place. There's no need to heat them but can help.
Once they are safely in place you can resume the print. First layer onto them will be not so precise right on the nuts but layer after layer the printer will do its magic!

Customization

Not only an empty back!
I know that all of us, aviation fanatics, have a preferred brand to hava always in the pocket. This way, a lot of logo embossed back plates are available as print profiles! Choose yours!