N/HO Scale Log Cabin

PLEASE READ AND UNDERSTAND THE WHOLE DESCRIPTION BEFORE PRINTING

Hello MakerWorld! Introducing the N/HO Scale Log Cabin! It uses no AMS, and prints in 4 distinct parts: The Main Structure, the Roof, the Porch, and the Chimney. I made this model to help others with their train layouts or other miniature setups, and I hope you can find it useful!

Select the correct print profile for your desired scale, and whether you want to print by object, or by plate.

NOTICE: You will need glue to assemble this model.

Assembly Guide

Step 1. Print all parts as shown below, and get some glue.

Step 2. Apply a thin layer of glue on the circled spots, shown below.

Step 3. Plate roof piece onto main structure, as shown in photos below, making sure to put the longer end of the roof on the side of the house with the door.

Step 4. Grab the porch piece, applying glue to the red areas.

Step 5. Place the piece as shown below, making sure to line up the poles with the divots on the roof.

Step 6. Apply glue to the hole inside the chimney piece, marked in red.

Step 7. Connect the chimney piece on the circled area, making sure its straight before the glue dries.

You're Finished! Add whatever detailing you like and place it in your railroad or miniature setup and make sure to leave a review! The feedback is much appreciated! :) Thanks for printing!

Make sure to check out My Collection of N Scale models for more fun prints!

Descrição