Update 2025-04-09: Added 2x4 and 4x2 Horizontal and Vertical boxes by request.
 

Inserts for the small Harbor Freight Organizer Bins. Inserts have a spot for labels. Versions for both vertical and horizontal orientations.

This is inspired by the many of the other inserts that I have tried over the years; none of them exactly matched my needs so I finally designed my own version. I hope others find this useful.

I printed all of these with a 0.4mm nozzle at 0.28mm layer height in PLA on my Bambu Labs P1S.   I recommend ironing the top most layers especially if you want to write on the label. The 3x4 and 4x3 inserts may need a brim (otherwise the tend to fall over at about the 90% done mark.) All but the smallest inserts were printed successfully in “Sport” mode.

Many different sizes.
Files are named using the following pattern:
A_B_CxD.stl:
A: SB = Small Bin (Will be releasing versions for the Medium and Large Bins later)
B: V = Vertical OR H = Horizontal
C: number of Horizontal divisions/Columns

D: number of Vertical divisions/Rows
ex: SB_V_2x3.stl = Small Bin Insert, Vertical orientation, 2 Columns of 3 Rows.

Horizontal inserts are primarily for use in the 15 Bin Storage Cases.
Vertical inserts are primarily for use in the 20 Bin (Medium) Storage cases.

Please leave feedback and let me know if you have any issues (I have printed all of these on my P1S and tested and used them.)