Simple fruit picker, Ideal fot apples.

Attaches to a standard pole up to 20mm diameter, (I used a clothes line prop 19.5mm dia).

Threads onto a fizzy drinks bottles 1L to 2L with a thread of 27.5mm outside diameter, (Very Common).

Good for reaching fruit high in the tree.

Parts Required:

1 x  M8 x 20 bolt will be required.

1 x Plastic Drinks bottle required.

Assembly:
I had to tap the 8mm thread hole after printing. 
If you don't have an M8 tap simply saw slots into the end of the threads on the M8 bolt. This will easily clean out the thread.

Simply cut the bottom off the bottle, and thread onto the picker then attach your pole.