Small fruit fly trap

Fruit fly small trap

Size: 6 × 3.5 cm
Includes 6 different versions in the profile.
To use: pour some cider vinegar into the container, then add a little sugar and a drop of dish soap.
Apply a clear coat inside the container to prevent leaks — especially recommended for PLA and PETG prints.
Based on user feedback, the following print settings can improve waterproofing:
- Layer Height: 0.16 mm
- Wall Thickness: 0.6 mm (Outer/Inner)
- 4 walls
- Infill/Wall Overlap: 35%
- Flow Rate: 1.05
- use ASA filament
Recommended clear coat: Motip Rallye Clear Varnish 500ml
No supports required.