The dimensions are 250mm x 199.00mm (you can scale it down if you want, but keep the Z to 2mm)
A follow would help a lot! <3 Thank you!

Layer height 0.08mm (extra fine)
Initial layer height 0.16.
Sparse infill density 100%, rectilinear.

 The Max Depth is 1.5mm and the Actual Depth is 1.6mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.3
    PLA Bambulab Basic Purple Transmission Distance: 2.2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Purple

Border Only Colors from here until the end.
    At layer #13 (1.12mm) swap to Jade White for the rest.