A1 Maintenance Tools & Box (Lubing & PTFE Tube)

Check out my newly released model:

----------------------------------------------------

These are tools for maintaining your Bambu Lab A1. There are 4 tools, 3 of which are for lubing the printer's X, Y, and Z axes. The one marked with P is for taking out the PTFE tubes. There is a magnetic box for keeping them clean. The box itself is optional. You can print all, with the bottom part of the box only or just the maintenance tools. I've uploaded profiles for all of them.

Non-printed Part Requirements:

There are two versions, one using 4×2mm magnets and one using 6×2mm magnets.

For the one using 4×2mm magnets:

4×2 mm circular magnets → Quantity: 16 → For the tools, the bottom part of the box and the top part of the box

For the one using 6×2mm magnets:

6×2 mm circular magnets → Quantity: 16 → For the tools, the bottom part of the box and the top part of the box

You also need super glue to glue the magnets in place.

Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉

→ Model link on Onshape ←

Dimensions:

4×2 mm magnet version:

Case - Top & Bottom: 101 × 98 × 14.4 mm

Case - Bottom Only: 101 × 98 × 7.2 mm

6×2 mm magnet version:

Case - Top & Bottom: 111.2 × 101.8 × 14.4 mm

Case - Bottom Only: 111.2 × 101.8 × 7.2 mm

Note: You can remove the tools easily by pressing on the letter. That will lift the tool like a seesaw.

Here is my own magnet configuration. Feel free to go with whatever works for you. You can swap all polarities in the picture and achieve the same result (all South with North and all North with South).

The head section of the tools are taken from the awesome models of @sderrick42 (Shane), all of the rest is designed by myself. Here is the link: Link to Shane's tools.

Check out my other accessories:

Mini Bag Clip v2