Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Please rate my prints, this really helps me, thank you
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 225.01x199.22mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 4.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Grey
At layer #25 (2.08mm) swap to Jade White for the rest.
