Project: Razor Crest 1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 220x123.86mm in size
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.91986mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance:
    #808080 PLA+ Sunlu Grey  Transmission Distance:
    #ffffff PLA+ Sunlu White  Transmission Distance:
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Grey
    At layer #16 (1.36mm) swap to White for the rest.