Based on the artwork of “The Great Wave off Kanagawa", this time piece features clean lines and vibrant tones. It is minimalist, yet so powerful. The towering, cresting wave dominates the foreground, as a moonlit sky line perfectly serves as a backdrop.

Note: Use Matte Jade White to get the desired results. Basic jade white will make it more subdued.

Customize your clock. All clocks are wall mountable. The mini clock has a magnet option also. You have the options of the clock size, use of a bezel, hour color accents, clock hands, and a stand. Color them how you see fit. This section you will choose the clock face to make your clock. 

The clocks have 2 sizes, Large(246mm) and Mini(170mm), and an option with or without a Bezel. The clock face without the bezel is the full 246mm(Large) and 170mm(Mini). While the one with the bezel is 234mm(Large) and 158mm(Mini) to accommodate the difference for the 6mm bezel interface. Some faces have an added option of regular numbers and roman numerals. Pictured below are some samples.

Below are links to the clock parts for their respective sizes and the clock hands if needed:

Large: [https://makerworld.com/en/models/1220826-clock-large-wall-mount-or-with-display-stand#profileId-1237665](https://makerworld.com/en/models/1220826-clock-large-wall-mount-or-with-display-stand#profileId-1237665)

Mini: [https://makerworld.com/en/models/1220990-clock-mini-wall-mount-magnets-or-display-stand#profileId-1237871](https://makerworld.com/en/models/1220990-clock-mini-wall-mount-magnets-or-display-stand#profileId-1237871)

Clock Hands: [https://makerworld.com/en/models/1221053-clock-hands#profileId-1238638](https://makerworld.com/en/models/1221053-clock-hands#profileId-1238638)

More clock faces can be found at my Clocks Collection: [https://makerworld.com/en/collections/5469420-clocks](https://makerworld.com/en/collections/5469420-clocks)

The Great Wave Clock (The One Shown is 170mm, Mini Clock without Bezel)

Note: Use Matte Jade White to get the best results
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Stringing may occur with Hueforge, just use a lighter to whisk them away. 

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4 (Dark Blue)

PLA BambuLab Basic Turquoise Transmission Distance: 2.3 (Light Blue)

PLA BambuLab Basic Matte Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer (0.72mm) swap to Blue (Dark Blue)

At layer (0.96mm) swap to Turquoise (Light Blue)

At layer (1.28mm) swap to Matte Jade White for the rest.