Project: space needle bookmark.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.02x200mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.59999mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #007672 PLA Paramount 3D Mid Century Teal  Transmission Distance: 2
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #4e6a84 PLA PolyTerra Muted Blue  Transmission Distance: 0.3
    #e6dede PLA Overture Matte White  Transmission Distance: 3.7
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #10 (0.88mm) swap to Mid Century Teal
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Muted Blue
    At layer #13 (1.12mm) swap to White for the rest.