中文：

这是一个用于 TikTak 玩具枪 2.0 版的 DIY 弹夹/药盒替代品，设计用来插入原装 Tik Tak 糖盒的位置。

我最初打印这把枪纯粹是喜欢它可爱的外形，适合把玩。但随着深入了解，我对它的功能产生了好奇，想尝试装入塑料球之类的物品进行发射。不过，我发现原作者使用的 Tik Tak 糖果弹夹在国内购买成本较高。

因此，我设计并打印了这个替代盒。请注意：这并非原装糖盒的精确复制品。其壁厚和高度完全是我根据 TikTak 枪的弹夹井尺寸自行设计的。为了适配并卡紧弹夹井，盒体尾部需要用透明胶带缠绕几圈以增加壁厚。

这是我的第一个设计项目，可能比较粗糙。如果大家有需求并且喜欢这个想法，我很乐意根据反馈进行改进。

英文 (English Translation):

This is a DIY replacement magazine/cartridge container for the TikTak toy gun version 2.0, designed to fit into the slot originally meant for the Tik Tak candy box.

I initially printed this gun purely because I loved its cute appearance and found it enjoyable to play around with. However, as I explored it further, I became curious about its functionality and wanted to try loading items like plastic balls for shooting. Unfortunately, I found that the original Tik Tak candy magazines used by the designer were relatively expensive to purchase domestically.

Therefore, I designed and printed this replacement box. Please note: This is not an exact replica of the original candy box. Its wall thickness and height were entirely designed by me based on the dimensions of the TikTak gun's magazine well. To ensure a snug fit and secure hold within the magazine well, the rear end of the box body needs to be wrapped several times with transparent tape to increase its wall thickness.

This is my first design project and it might be a bit rough. If there is interest and you like the idea, I’m happy to make improvements based on feedback.