This is my first model.. Please give me a Boost!

Title: RV Solar Panel Mounting Bracket

Description:

This simple design provides a stable platform for mounting your fixed Solar Panels to a flat surface. You will need at least four corners, but also print as many sides as you feel you will need to support your solar panel.

📦 Print Settings:

• Recommended Layer Height: 0.2mm
• Infill: 15% Gyroid
• Walls: 4-5 to give it the strength
• Supports: None required
• Material: ASA, as these are used in environments outside normally. ABS might do the trick also.

💡 Maker’s Note:
I designed it for use on the top of my rooftop tent, so I could use some wide-head pop rivets to mount both the panel to the mount, and then the mount to the roof. 

The rivet holes will fit 4.8mm rivets (like you can get at Bunnings), but it was made for 4mm, large flange, with a long shank. Something like these [https://www.aliexpress.com/item/1005003784089411.html](https://www.aliexpress.com/item/1005003784089411.html) (4.0 x 12 x 12mm)

Hope that it's useful for you as it was for me. It's a functional print, so not the prettiest of things on top. Add a hilbert curve if you'd live to see it pretty.