Another DanDaDan Hueforge with a different style, like a ballpoint pen drawing!

Print Instruction:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150.2mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

Filaments Used:
    #080a0d PLA Black  Transmission Distance: 0.1
    #c00d1e PLA Basic Red  Transmission Distance: 4
    #ffffff PLA Basic Jade White  Transmission Distance: 5
    #7900b6 PLA Purple  Transmission Distance: 2.5
    #0000ff PLA Blue  Transmission Distance: 1.6
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #10 (0.88mm) swap to Jade White
    At layer #12 (1.04mm) swap to Purple
    At layer #14 (1.2mm) swap to Blue
    At layer #17 (1.44mm) swap to Jade White for the rest.

For only One AMS,
Start with 4 colors as follows:
Slot1: Black
Slot2: Red
Slot3: White
Slot4: Purple
Pause was set at Layer #7 in the print file to allow color swap:
Slot1: Black --> Blue