A light box of the Pokemon Pikachu, using one of my own drawings meant to emulate a tribal style tattoo. As a colored light box these drawings look much more like a neon lighted sign. You could also switch the colors and print the box white and Pikachu black to get the same effect as my drawing. The 3MF file has a 6 color and 4 color version.

There is a 20mm hole in the back for a plug. If you would like to size the model down, I recommend keeping the z height at 100% so the light box is still thick enough. Remember that the hole will also change size if you size down the model. I used sticky strips of LED lights, but you can pick what works best for you. The print is about 253mm x 179mm x 42mm after being assembled.

Filaments used:
Bambu basic black
Bambu basic red
Bambu basic sunflower yellow

Bambu basic dark grey
Bambu basic brown

Bambu matte sky blue

Pokemon is an intellectual property and you should not sell prints of their characters. This file is meant for personal use.
For exclusive models and rights to sell my models check out my Patreon.
[https://www.patreon.com/c/vogel3dcrafts](https://www.patreon.com/c/vogel3dcrafts)