• Small lamp that is simple to print, simple to assemble, no tools needed, no hardware needed (beside the led light and an usb cable extender ). Some glue is needed if you want to glue the parts together.
• Multicolor, but easy to print without AMS.
• You only need a small USB Led and an USB extension cable.

The USB LED used is something like this one ( only the diameter is important, to not be bigger than 2.4cm.

I've found this in a local shop (eg Jumbo)

This can be found online on:

• Temu: [https://share.temu.com/zSShLQ43sHA](https://share.temu.com/zSShLQ43sHA)
• Aliexpress: [https://vi.aliexpress.com/item/1005006054756352.html](https://vi.aliexpress.com/item/1005006054756352.html)
• Amazon: [https://a.co/d/dbdB6PD](https://a.co/d/dbdB6PD)
• I'm sure you can find this in many places, just search for usb led / mini led etc.

You also need an USB extension cable like this one ( search “usb extension cable” and you will find tons of them, if you don't already have one at home):

Assembling instructions:

• Please check the picture bellow for an exploded image of the lamp.
• First, you should pass the USB extender through the pen body and attach the USB led.
• Fix the let in place, on the top of the pen.
• Add the two parts of the pen tip, around the USB cable and insert them into the pen body.
• Insert the tip of the pen into the base of the lamp. You can rotate the parts so that the cable is aligned and also the seams of the parts faces the way you prefer.
• Enjoy your new USB Lamp. You can glue the parts together after you found the position you like.