This is an unofficial Space Invaders wall art, made in homage to this classic game! Bring some action to your house with this art!

I have included 2 versions of this model, one in 4 colors, and another in 2 colors. It's also possible to print this without AMS, using print pauses at certain layer heights. Both models are 120x160mm in size.

The frame holder is snap and fit, so no other parts are necessary for assembly.

Disclaimer: I am not associated with Taito or Atari in any way. This is just the work of a fan from the game :)

Do you like my models? Consider buying me a coffee ;)

No-AMS Instructions

• 4-color version: Add one pause at layer height 0.8 (layer 9) and switch from black to white. Add another at layer height 1.28 (layer 15) and switch from white to green. Add one last pause at layer height 1.52 (layer 18) and replace green with red.
• 2-color version: Add one pause at layer height 0.8 (layer 9) and replace black with green.

There's also an automated version of those steps in the print profile, just select the desired print plates.

AMS instructions

Just load the desired colors in your AMS, and select the plates in the print profile. If you're slicing the STL directly, you'll need to paint based on the layer heights as described in the No-AMS instructions.

Print Settings

Printer Brand:

Rafts:

Doesn't Matter.

Supports:

No.

Resolution:

• Wall art: 0.08 layer height with an initial layer height of 0.16.
• Frame holder: 0.2 layer height. Same for the initial layer height.

Walls/Perimeters:

• Wall art: 2.
• Frame holder: 3.

Infill:

• Wall art: 100%
• Frame holder: 20%

Filament:

Any.