The head and body are two separate parts. Simply click the head onto the body. Please be careful when doing this!

If you print the multipart version, please make sure that you assign all parts correctly before you start gluing them together!

Tips for printing:

• Filament: PLA
• Supports: No!
• Layer height: 0.2mm
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: No!
• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Do not scale the Snake any smaller or larger otherwise the connections will no longer work!

Colors and filament I used (4 Color):

• PLA Matte / Orange
• PLA Matte / Yellow
• PLA Matte / White
• PLA Matte / Balck

Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste! Or you can use my multiple parts version to avoid filament waste!