Floating Corner Shelf – Clean Look, Quick Install

This sleek floating corner shelf is a practical, easy-to-install solution for adding style and storage to any room. Designed with makers in mind, it installs quickly and cleanly—even if your walls aren't perfectly square.

Installation Tips:

The easiest method: use a small level and a strip of painter’s tape. Attach the tape to the top of the level, mark the screw hole positions on the tape, and use it as a guide. The screw holes are symmetrically spaced from the corner, and the mounting block hole is centered for foolproof alignment.

• First screw hole: 33 mm (1 5/16″)
• Second screw hole: 193 mm (7 5/8″)
• Shelf top surface height: 23 mm above screw holes

Hold the level against the wall, make sure it's level, and transfer your marks (a simple dot with a marker works well). Install anchors at the marked positions and attach the brackets. The tapered screw holes should face outward to seat the screw heads properly.

A Note on Corners:
Most home corners aren’t perfectly square—this shelf is. To account for that, you might need to leave a screw slightly loose while adjusting the blocks. Once mounted, just slide the shelf straight down onto the brackets, keeping it level. You may need to nudge the blocks slightly if there was play left for adjustment.

On textured or uneven walls, final alignment may take an extra minute—but total install time is usually under five minutes. To square everything up, use a level and gently tap into place with a soft tool like the side of a tape measure or a small hammer. Just remember, all parts are plastic—so no need to overdo it.

Thanks for checking it out, and happy printing!