Project: coffin bookmark.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 1.84mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #623e2a PLA PolyTerra Earth Brown  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #e5c8a2 PLA PolyLite Cream  Transmission Distance: 2
    #e6dede PLA Overture Matte White  Transmission Distance: 3.7
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #13 (1.12mm) swap to Earth Brown
    At layer #14 (1.2mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Cream
    At layer #19 (1.6mm) swap to White for the rest.