The Panzerkampfwagen IV (Pz.Kpfw. IV), commonly known as the Panzer IV, is a German medium tank developed in the late 1930s and used extensively during the Second World War.

Print can be resized on the y and x axis only. keep the height the same to make sure the colours are correct!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x79.77mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA Default White Transmission Distance: 5
    PLA PolyLite Black Transmission Distance: 0.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Orange
    At layer #16 (1.36mm) swap to Beige

Border Only Colors from here until the end.
    At layer #22 (1.84mm) swap to White

This slider is set higher than the mesh depth.  It is not affecting your final mesh.  Consider removing it.
    At layer #30 (2.48mm) swap to Black for the rest.