A light box of the Pokemon Pikachu, using one of my own drawings meant to emulate a tribal style tattoo. As a colored light box these drawings look much more like a neon lighted sign. You could also switch the colors and print the box white and Pikachu black to get the same effect as my drawing. 

There is a 20mm hole in the back for a plug. If you would like to size the model down, I recommend keeping the z height at 100% so the light box is still thick enough. Remember that the hole will also change size if you size down the model. I used sticky strips of LED lights, but you can pick what works best for you. Version 1 is about 225mm x 251mm x 42mm after being assembled and version 2 is about 224mm x 248mm x 42mm.

Filaments used:
Bambu basic black
Bambu basic red
Bambu matte lemon yellow

Bambu basic dark grey

Bambu basic jade white
Bambu matte ivory white (inside of back plate)

Pokemon is an intellectual property and you should not sell prints of their characters. This file is meant for personal use.
For exclusive models and rights to sell my models check out my Patreon.
[https://www.patreon.com/c/vogel3dcrafts](https://www.patreon.com/c/vogel3dcrafts)