Easel GENERATOR - Highly Customizable — STL Grátis

Based on the Mini Easel, I have now designed this highly customizable version of an easel. The model uses also Print-in-Place Technology and do not need any support structures, when printing.

There are various parameters that can be used to change the size of the easel without compromising the print-in-place technique.

Parameter	Default Value	Range of Values*	Meaning of the Parameters
pEaselWidth	40 mm	≥ 20 mm and ≤ 320 mm	Width of the easel stand
pEaselHeight	60 mm	≥ 26 mm and ≤ 350 mm	Height of the easel stand
pLegWidth	4 mm	≥ 2.8 mm and ≤ 1/5 of EaselWidth	Width of the easel legs
pLegAngle	20 deg	≥ 17.5 deg and ≤ 22.5 deg	Angle between the legs when easel is upright
pTrayWidth	40 mm	≥ EaselWidth and ≤ 320mm	Width of the tray
pTrayThickness	3 mm	≥ 1.6 mm and ≤ LegWidth	Thickeness of the tray
pTrayDepth	12 mm	> pLegWidth and ≤ 1/3 of EaselHeight	Depth of the tray
pTrayPos	12 mm	> 0 mm and ≤ 1/2 of EaselHeight	Position from floor to bottom edge of shelf
pTrayAngle	0 deg	> 0 mm and ≤ LegAngle	Angle between tray and legs Using the same value as for LegAngel results in the tray being positioned horizontal while the easel is upright
pScaling	1	≥ 0.5 and ≤ 5.0	Using Scaling will result in up- or downscaling of the above values and is the easiest way to change the size of the easel

* Adjusting the model with values outside the range results in the maximum or minimum possible values being used automatically. This prevents the structures of the adjusted model from being destroyed.

Descrição

Easel GENERATOR - Highly Customizable