Project: John Wick.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141x250.42mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #ffffff PLA Winkle PLA HD Blanco Glaciar  Transmission Distance: 2
    #a9b1b0 PLA Jessie Premium Gun Metal Grey  Transmission Distance: 5
    #576d81 PLA Jayo PLA Gray  Transmission Distance: 4
    #000000 PLA Generic PLA Black  Transmission Distance: 1.7

This print uses 4 unique filaments

Swap Instructions:
    Start with Blanco Glaciar
    At layer #10 (0.88mm) swap to Gun Metal Grey
    At layer #16 (1.36mm) swap to Gray
    At layer #21 (1.76mm) swap to Black for the rest.