Wolf Moon Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: [https://buymeacoffee.com/heyben](https://buymeacoffee.com/heyben)

Wolf Moon Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 4.56mm and the Actual Thickness is 2.04mm

Filaments Used:
    #000000 PLA BambuLab Basic Black Transmission Distance: 0.2
    #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.1
    #d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.4
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.7
This print uses 4 unique filaments

***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.04mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions:
    Start with Black
    At layer #4 (1.24mm) swap to Dark Gray
    At layer #7 (1.36mm) swap to Light Gray
    At layer #11 (1.52mm) swap to Jade White for the rest.

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Descrição