This modern lamp allows you to illuminate your desks with two configurations: a frame to accommodate an LED strip or a phone holder.

There are multiple adjustment points:

• Easy attachment to the desk using a clamp with adjusting screws;
• Ability to rotate the entire structure by 360 degrees;
• Each arm allows rotation from -50° to +50° approximately;
• The LED frame adjustment arm can also rotate by 360 degrees;
• Hooks are available to secure the LED power cable or the phone charger cable (max. Ø 4 mm);

Please note, two M3 screws (length up to 8 mm) are required to screw the LED frame cover. The hole that allows the power cable to enter the frame is 4.5 mm. If you are not able to solder you can use a led strip with the connectors already prepared, but there is a risk that you will not be able to get the cable through the hole.

Ver. 1.01: Added a new optional version of the screws that allows them to be tightened using a 24 mm spanner.

Ver. 1.02: Modified clamp screw (Thanks to @miao_o)

I've printed my own version using a mix of Sunlu PETG and Bambu Lab PLA Tough. This is the result: