Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Please don't forget to rate my prints, thank you

The Model is 225x217.36mm in size
You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 3.9
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA Overture Matte Pink Transmission Distance: 2.5
    PLA Kexcelled Sky Blue Transmission Distance: 2.6
    PLA BambuLab Basic Jade White Transmission Distance: 4.7

This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Red
    At layer #14 (1.2mm) swap to Orange
    At layer #18 (1.52mm) swap to Pink
    At layer #23 (1.92mm) swap to Sky Blue
    At layer #26 (2.16mm) swap to Jade White for the rest.