我打印了很多Y型分线器，但效果都不满意，所以只能自己设计，它必须要有气动连接头，不然特氟龙管会脱开，靠摩擦力紧固的时间久了也会脱开，而且不能承受稍大的线材压力。

使用两个KJS04-M5气动接头。或者你有其他M5的头都可以。

参考文末链接(可能并不是最便宜的，有空请自行寻找)：

---------------------------------

I printed many Y-shaped splitters, but none of them met my satisfaction, so I had to design my own. It must have pneumatic connectors, otherwise the Teflon tube will detach. Over time, fastening by friction will also cause it to detach, and it cannot withstand any significant pressure from the wire.
Use two KJS04-M5 pneumatic connectors. Or if you have other M5 heads, they are also acceptable.
Refer to the link at the end of the text (it may not be the cheapest, please find it yourself when you have time):

-------------------------------------------------

[https://item.taobao.com/item.htm?id=521174209049&skuId=3754235156266&spm=tbpc.boughtlist.suborder_itemtitle.1.567a2e8dWT04OI](https://item.taobao.com/item.htm?id=521174209049&skuId=3754235156266&spm=tbpc.boughtlist.suborder_itemtitle.1.567a2e8dWT04OI)