It's the flame thrower from Alien isolation!

I've matched it as best as I could to the model that is in the video game, with small changes here and there to improve printability. Note that the model uses slightly over 1 kg of filament, so if using one colour you will need two spools. Only one spool of grey is required for all the grey pieces if you print with the right colours in the print profile. I encourage you to try and paint it once its done!

Note that:

• Though I have not printed the bottles yet, I have printed a small puck with the same connection as proof of concept that it will work with the full sized bottle (see photos).
• I used a metalic gold sharpie on black filament to get the brass looking piece.
• I used a silver sharpie to get the accents of the flamethrower (before the pen promptly exploded in my lap).
• This model uses M3x20 nuts and bolts for the main body pieces! The rest of the pieces are interference fit. I don't like using glue but you can have at it if you find pieces aren't staying where they should be.
• The printed model is roughly 3ft (900mm) long.

Please read the instructions.

If you have questions or comments, please don't hesitate! I would love feedback on this model, and I am open ot making changes if people identify things that can be improved.