Projet: Loup lune.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments utilisés: 
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Jade White  Transmission Distance: 5
    PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
This print uses 3 unique filaments

Instructions de changements:
    Commencer par Black
    At layer #11 (0.96mm) swap to Jade White
    At layer #13 (1.12mm) swap to Ice Blue
    At layer #14 (1.2mm) swap to Jade White
    At layer #16 (1.36mm) swap to Ice Blue
    At layer #19 (1.6mm) swap to Black
    At layer #20 (1.68mm) swap to Jade White pour le reste.